F&Q offers submersible motors serving both municipal and industrial wastewater markets for both wet & dry pit applications. Wet pit motors use the effluent for cooling and can run 15 minutes in air. Dry pit motors are designed to run continuously in air or submerged when properly applied. F&Q also offers designs suitable for rugged slurry pump applications, aerators and mixers.

These motors are tough and corrosion resistant, with cast iron frame and end shields, 304 stainless steel hardware and 420 stainless steel shaft. Dual moisture probes will detect any moisture in the oil chamber. These motors are covered by a two year prorated warranty.

• Energy efficient and Premium efficient designs
• 1.15 S.F. on Sine Wave, 1.0 S.F. on inverter
• Class F insulation
• Cast Iron Construction
• P-Base mounting flange
• 420 Stainless Steel Shaft
• Type 21 carbon ceramic mechanical shaft seals. O-rings and Sealed fits in stator housing and end plates
• Non-wicking, potted cable cap assembly securely attaches and seals the power leads to the frame. Cable cap design allows for easy removal and reconnection of the power cable.
• Drive end oil chamber provides a barrier against moisture ingress into the bearings as well as lubricating the upper seal. Oil chamber is filled prior to shipment.
• Moisture probes mounted in oil chamber to detect ingress of moisture. Moisture control relay supplied by customer.
• (2) Integral cast in lifting provisions for easy, balanced lifting and mounting of the motor
• Deep groove Conrad type ball bearings, Class 3 fit per AFBMA std. 20
• (2) N.C. Thermostats
• 416 Corrosion resistant stainless steel nameplate and exterior hardware
• 40 foot power & control cables
• Neoprene jacketed power and control cables
• 2 Year Prorated Warranty from date of Manufacture.

• Class H insulation system
• Special paint (Coal tar epoxy paint)
• Inner and outer seals options
• Cable lengths to 100 feet (Longer lengths require approval)
• Shaft materials
• Water Jacket Design (to reduce frame size requirements)
• One size smaller flange and shaft

Please download the Submersible Motors brochure here