Grinder Pumps

FZG Series    FC Series    FG Series   Retro-Fit Systems    WQG Series

FNG Extreamly High Head Grinder Pump

Application:

The FNG extreamly high head grinder pumps easily handle residential, light commercial or industrial sanitary waste, reducing it to a fine slurry. The FNG pump is designed for use in pressure sewer applications or any piping network.

 

Key Features:

    • Oil-filled motor for maximum motor cooling and constant bearing lubrication
    • Extreamly high head up to 320 feet
    • Capacitor start/run design for assured starting, strong torque and grinding under heavy load
    • On-Winding current and temperature-sensitive overload
    • Pressed stator for precise shaft / bearing alignment, long life
    • Grinder impeller and shredding ring are made of 440C stainless steel hardened to 56-60 Rockwell C
    • Revelutionly Two-sided turbine impeller design
    • Clog-free volute design

 

Technical Data:

  • DISCHARGE ................. 1.25” NPT,Vertical
  • LIQUID TEMPERATURE 120ºF(40ºC) Continuous 140ºF(40ºC) Intermittent
  • VOLUTE ....................... Ductile Iron
  • MOTOR HOUSING ....... Cast Iron ASTM A-48,Class 30
  • SEAL PLATE .................. Cast Iron ASTM A-48,Class 30
  • IMPELLER .................... 440C Stainless Steel,Vortex impeller, 60 Vane,Dynamically Balanced,ISO G6.3
  • GRINDER IMPELLER .... Hardened 440C Stainless Steel,56-60 Rockwell C
  • SHREDDING RING ...... Hardened 440C Stainless Steel,56-60 Rockwell C
  • SHAFT ......................... 420 Stainless Steel
  • O RING ........................ Buna-N
  • SEAL: Design ............ Single Mechanical in Oil-Filled
    Material ......... Rotating Face - Silicon Carbide
    Stationary Face - Silicon Carbide
    Elastomer - Buna -N
    Hardware - 300 Series Stainless
  • CABLE ENTRY .............. 30 Ft (9.1m) Cord .
    Compression Grommet-Outer Jacket Seal
    Epoxy Potted – Inner Conductor Seal
    Butt Connector – Inner Wire Strand
    Wicking Blockage
  • UPPER BEARING ........ Single Row, Ball, Oil lubricated
  • LOWER BEARING ....... Single Row, Ball, Oil Lubricated
  • MOTOR ..................... Single Phase, 2 HP, 3450 RPM, 60 Hz
    Dual voltage, 200 / 230 volts
    Includes Overload Protec on in the Motor
    Oil Filled,Class F
    Capacitor Start / Capacitor Run
  • OPTIONAL EQUIPMENT: Cord Length, Leg Kit

Performance:

Model Hp Volt.
Ph		 FLA
amps		 Gal/Min @ Total Head in Feet Shut
off		 Weight
(lbs)
50 100 150 200 250 300
FNG2-21C 2 208~230/1 15 22 19 14 10 6 2 320 75

Download the FNG Grinder pumps brochure here