Sump Pumps

CFQ Sump Pumps Series

Application:

Submersible sump/effluent pumps designed to be used in a variety of residential and commercial application. Such as: Basement sumps, Dewatering, Utility, Effluent and Wastewater removal, Sump Drainage, Water Transfer etc.

Key Features:

  • 1/3HP, 1/2HP and 3/4HP
  • CSA approved
  • Class 30 cast iron construction
  • 1-1/2”NPT discharge, Vertical
  • Single mechanical, Silicon Carbide, 300 series Stainless Steel Parts
  • Oil-filled motor with automatic reset overload provides safe operation
  • Ball bearing construction for long life
  • Piggy-back style float switch for automatic operation
    (Optional, Model "A")

 

Technical Data:

  • DISCHARGE - 1-1/ 2" NPT. Vertical
  • SOLIDS HANDLING CFQ33/50: 1/2" (13mm)
                                     CFQ75: 3/4" (19mm)
  • LIQUID TEMPERATURE 104 Degrees F. Contiuous
  • MOTOR HOUSING Cast Iron
  • VOLUTE Cast Iron
  • SEAL PLATE Cast Iron
  • IMPELLER Cast Iron, 10 Vane, Vortex           
  • SHAFT Stainless Steel
  • BEARING (UPPER & LOWER) Single Row, Ball, Oil Lubricated
  • HARDWARE 300 Series Stainless Steel
  • SQUARE RINGS Buna-N
  • POWER CORD 20ft cord, pressure grommet for sealing and strain relief. U/L and CSA listed 16AWG Type SJTOW
  • MOTOR (SINGLE PHASE) 
    3450 RPM, 60Hz, 115 Volts
    NEMA L Includes Overload Protection In The Motor.
    Oil Filled, Class B
    Permanent Split Capacitor 
  • SIZE 9.1" X 6.9" X 11"

Performance:

Model Hp Volt.
Ph		 FLA
amps		 Gal/Min @ Total Head in Feet Shut
off		 Weight
(lbs)
0 5 10 15 20 25
CFQ33A 1/3 115/1 5.8 52 48 42 35 30 20 31 27
CFQ33M 1/3 115/1 5.8 52 48 42 35 30 20 31 26
CFQ50A 1/2 115/1 6.8 63 55 50 40 32 22 31 28
CFQ50M 1/2 115/1 6.8 63 55 50 40 32 22 31 27
CFQ75A 3/4 115/1 9.8 98 80 70 60 45 35 32 30
CFQ75M 3/4 115/1 9.8 98 80 70 60 45 35 32 29

 

 

Download the CFQ Sump pumps brochure here